Available Mon-Fri
9am-5pm CST
+1 310-722-7117
Couldn't load pickup availability
The vintage wooden Bluetooth turntable vinyl record player offers a nostalgic experience and adds elegance to any room with its carefully crafted walnut wooden finish.
Its high-quality sound is on par with modern music players, and it can play records at both 33⅓ and 45 RPM. In addition, its Bluetooth connectivity allows for streaming of digital music, creating a perfect combination of the old and the new.
Whether you're a seasoned vinyl collector or a newcomer to the world of vinyl records, our record player is the ideal way to enjoy your favorite music.
Rekindle your love for vinyl with the Angels Horn H002BT-OR Exceptional Quality Vintage Wooden Bluetooth Turntable Vinyl Player.
|
|
|
---|---|---|
Wireless ConnectivityStay ahead of the curve with the latest Bluetooth v5.0 capability. Pair wireless speakers or headphones (not included) and free yourself of wires! Suddenly, the best place to put your turntable and your favorite listening spot don’t have to be the same. Just pair and listen how and where you want to. Even better, no receiver is needed! |
Belt drive systemBelt drive system and DC servo motor can make the iron turntable rotate at 33 1/3 or 45 RPM. The rotation speed can be selected according to the speed of the vinyl record so that the turntable can perfectly interpret the vinyl record to your High-quality music life. |
Anti-Skating WeightPrevent scratches to vinyl by ensuring the stylus sits perfectly inside the record’s groove, keeping clarity on musical peaks, balancing channels, and providing freedom from noise and distortion. |
Troubleshooting Guide
1.Q: The turntable keeps turning too slowly
A: Please repair the record player by removing the bottom panel to access the bottom of the belt drive motor. and please add lubricating oil to the spindle and the spindle hole in the middle of the turntable and insert the sub-platter into the turntable spindle. then turn the sub-platter clockwise and counterclockwise by hand to prevent jamming, and press the sub-platter few times, the issue will be solved completely.
2.Q: The platter spins, but there is no sound or the volume is not loud enough.
A: • Are the function settings and input for connected equipment (amplifier, etc.) selected correctly? Check whether the settings for the connected equipment are correct.
• Is the stylus damaged? Check the stylus and replace it, if necessary.
• Is the stylus placed correctly on the body of the cartridge? Check the cartridge and adjust it, if necessary.
• Are the setting positions for the pre-amplifier selector switch correct? Check that the preamplifier settings are correct, noting the following common problems and their causes:
— If there is no sound, or if the volume is not loud enough, the product is set to the “PHONO” position and connected to the amplifier’s AUX/LINE input. — If the volume is too loud or is distorted, the product is set to the “LINE” position, and the connectable equipment is connected to the PHONO input.
3.Q: The platter does not spin.
A: Please kindly note our turntable is fully manual, and you should move the tonearm to get the turntable to spin.
• Is the AC adapter connected to the outlet? Connect the AC adapter to the outlet.
• Has the belt slipped from the platter? Correctly place the belt on the platter.
• Is the belt placed on the motor pulley? Check that the belt is placed on the motor pulley correctly.
• Has the belt been damaged? Replace it with a new belt.
4.Q: The stylus skips
• Ensure the record surface is clear of dirt and debris. Also check that the record is not warped or deformed.
• Inspect the stylus for built up dirt or debris. Use a stylus cleaning brush to clean if necessary.
• Ensure the turntable is on a sturdy and level surface.
5.Q: Tonearm shaking too much, making records unplayable.
A: It’s recommended to re-adjust the tonearm and make sure it is neutrally balanced before the counterweight tracking force is set up.
6.Q: Does the arm automatically go onto the record by itself to play and stop?
A: The turntable is not automatic, so you should manually put the tonearm onto the record. But the turntable will automatically stop 3 minutes after the record ends, and you have to turn off the power switch and turn on again when you play again.
7. Q: Can't get the tonearm balance, how to do?
A: 1.Make sure the tonearm is balanced and the tracking force has set to factory-recommended 3.5g. If you don't know how, please follow our installation video.
2. The reason for that problem apparently was because one of the screws was loose at the center of the mechanism(up/down mechanism, two screws). So I was tighten them a little bit for get the bearings working properly.
The Angels Horn H002BT-OR Vintage Wooden Bluetooth Turntable is a remarkable blend of vintage aesthetic and modern technology. Beautifully crafted with an authentic wooden finish, this vinyl record player delivers clear, immersive sound that's sure to delight audiophiles and vinyl enthusiasts alike.
Moreover, the Angels Horn H002BT-OR Wooden Turntable offers wireless playback capabilities, allowing you to stream music from your favorite devices seamlessly. Its easy-to-use interface ensures you can enjoy your favorite tunes without the hassle. The thoughtful design includes a needle arm that automatically stops when it reaches the end of the record, protecting both the needle and your records from damage.
Lastly, the superior craftsmanship of the Angels Horn H002BT-OR Wooden Turntable, from its high-quality materials to its impressive technology, ensures this record player will be a lasting addition to your music collection. If you're a fan of the vinyl sound, this turntable is a must-have accessory.
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Thanks for subscribing!
This email has been registered!